Round Cribbage Board Digital Files
This is a Digital file with SVG and DXF. We use this file to make round cribbage boards with storage for cards and pegs.
board base size is
10.75 inches by .75 inches
material size is 12 inches by 12 inches and .75 inches thick
cutters used
1/4 inch endmill
.125 inch up cut (drilling tool path)
lid dimensions
7&15/16 by .75
material size is 9.125 by 9.125 inches by .75
cutters used
.125 inch up cut
.25 60 degree vee
then flip the lid material over and run the bottom pocket
cutters used is the .25 endmill
**please customize to fit your needs**
contains a zip file with .SVG and .DXF
This is a Digital file with SVG and DXF. We use this file to make round cribbage boards with storage for cards and pegs.
board base size is
10.75 inches by .75 inches
material size is 12 inches by 12 inches and .75 inches thick
cutters used
1/4 inch endmill
.125 inch up cut (drilling tool path)
lid dimensions
7&15/16 by .75
material size is 9.125 by 9.125 inches by .75
cutters used
.125 inch up cut
.25 60 degree vee
then flip the lid material over and run the bottom pocket
cutters used is the .25 endmill
**please customize to fit your needs**
contains a zip file with .SVG and .DXF
This is a Digital file with SVG and DXF. We use this file to make round cribbage boards with storage for cards and pegs.
board base size is
10.75 inches by .75 inches
material size is 12 inches by 12 inches and .75 inches thick
cutters used
1/4 inch endmill
.125 inch up cut (drilling tool path)
lid dimensions
7&15/16 by .75
material size is 9.125 by 9.125 inches by .75
cutters used
.125 inch up cut
.25 60 degree vee
then flip the lid material over and run the bottom pocket
cutters used is the .25 endmill
**please customize to fit your needs**
contains a zip file with .SVG and .DXF
